The Canon Battery Charger for EOS C300 Mark II Camcorder Batteries charges your BP-A30 and BP-A60 battery packs. It features two battery plates, which allows you to simultaneously charge two batteries. The charger has a detachable AC power cord, and can accept worldwide power from 100 to 240 VAC at 50 to 60 Hz.
At average room temperature you can charge a BP-A30 in approximately two hours and fifty minutes, while charging a BP-A60 will take approximately five hours. The charger is internally fuse protection and features a built-in battery charge indicator.
Charging System
- Constant-voltage/constant-current charging
Charging Detection
- Voltage and current detection
Charging Indicator
- Charging lamp (orange LED):
- When the battery pack is not installed: Off
- When the battery is installed: LED flashes
- 0 to 49%: LED flashes once every two seconds
- 50 to 74%: LED flashes twice every two seconds
- 75 to 99%: LED flashes three times every two seconds
- When charging is completed: LED remains lighted
Rated Input Power 100 to 240 VAC, 50 / 60 Hz
Rated Output Power 16.7 VDC, 3 A, 50.1 W
Charging Time BP-A30: Approximately 170 min
BP-A60: Approximately 300 min
Operating Temperature 32 to 104°F / 0 to 40°C
Dimensions 7.9 x 2.4 x 4.7" / 200 x 60 x 120 mm (Excluding plug terminals and cable section)
