Your basket is empty.

Added to Basket
Talk to an expert
0% Finance
Follow us on Facebook
Sound Devices Mic PreAmp with Headphone Monitor
SKU: SD-MM-1

£644.71 ex VAT
£773.65 inc VAT
https://www.productiongear.co.uk/sound-devices-mic-preamp-with-headphone-monitor.htmlSD-MM-11
GBP773.65





High Quality Portable Mic Preamp with Headphone Monitor

Highly versatile and portable, Sound Devices' MM-1 is a single-channel, portable microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamplifier uses a transformer-balanced input and output with a bipolar ±15 volt power supply to produce low-noise, low-distortion gain at all switch positions. It features an "unclippable" dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-18 VDC.

The MM-1 is at home in high-definition television production, corporate/industrial environments, radio/television announce booths, and music production. Its headphone monitor is an advantage in applications where communications channels or mix-minus feeds need to be monitored in headphones. The user can monitor both microphone audio and external audio sources in headphones with level control.

The MM-1 is designed to be durable. Its aluminum chassis, oversized end panels, machined knobs, and panel mounted connectors assure reliable mechanical operation.

  • Maximum of 66 dB of gain, in eleven discrete steps
  • Dynamic range exceeding 120 dB
  • 10 Hz to 50 kHz audio bandwidth
  • High immunity to RF interference
  • High current line output driver
  • Transformer-balanced input and output
  • Extended range peak limiter via dual opto-isolators makes preamplifier virtually "unclippable"
  • Selectable 48-volt / 12-volt phantom power or 12-volt “T" power
  • High-pass filter @ 80 or 160 Hz, 6 dB per octave
  • Headphone monitoring of microphone audio, monitor audio, or a mix of both
  • Monitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connector
  • Separate level control of Monitor gain and overall headphone gain
  • Split ear function via DIP switches
  • Internal battery power (two-AA)
  • Excellent battery life with alkaline and NiMH rechargeable batteries
  • External 5-17 VDC powering (plug included)
  • High-strength aluminum chassis with durable belt clip

Gain:
(Mic - Line): 0 dB to 66 dB input to output, switch selectable

Frequency Response:
(Mic - Line) 20 Hz –20 kHz, +0.1, -0.5 dB, -1 dB at 50 kHz(relative to 1 kHz level with 150 ohm source)

Equivalent Input Noise:
(Mic) -126 dBu (-128 dBV) maximum (150 ohm source, flat weighting, 22 Hz – 22 kHz bandwidth gain setting 36 dB or greater)

Dynamic Range:
(Mic to Line) 122 dB minimum at the +18 dB gain setting

THD + Noise:
0.05% maximum (from 50 Hz – 22 kHz @ +4 dBu output level, 22 Hz – 22 kHz filter bandwidth, +46 dB gain setting

Gain Accuracy:
(Mic - Line) +0.6, -0.1 dB with reference to front panel gain markings (150 ohm source, 100 k load impedances)

Output Clipping Level:
(Line) +22 dBu minimum with 100k ohm load+20 dBu minimum with 600 ohm load

Input Clipping Level:
(Mic) +4 dBu minimum at the 0 or +18 dB gain setting

Common Mode Rejection Ratio:
100 dB minimum at 80 Hz60 dB minimum at 10 kHz

Weight:
0.7 kg (1.1 lbs)

Dimensions:
49 mm x 95 mm x 166 mm, 1.95" x 3.75" x 6.55" (h x w x d)